Teraphysics Amplifier Enables 150 Gbps Wireless Hyperlinks

Cleveland, Ohio (PRWEB) May 15, 2015

Wireless transmission at unprecedented higher data prices using a millimeter-wave amplifier that weighs only 1.two pounds and has a footprint smaller sized than a credit card was described by Teraphysics Corporation, Highland Heights, OH, in a keynote presentation on April 28th at the 16th International Vacuum Electronics Conference (IVEC) in Beijing, China. IVEC is the premier conference in the field of vacuum electronics.

&#13

The paper, “Microfabricated mm-wave TWT Platform for Wireless Backhaul,” described the improvement and testing of a quite broad bandwidth, 94 GHz TWT (traveling wave tube) amplifier. The technology embodied in the 94 GHz TWT is applicable over a wide variety of frequencies. Teraphysics engineers have simulated information prices of 23 Gbps (one billion bits per second) at 83.5 GHz and 150 Gbps at 240 GHz more than a range of 1 km. These capabilities will be crucial in meeting the enhanced demand for fifth generation (5G) wireless capacity that is expected to grow by a element of 5000 more than the next 15 years.    

&#13

The function was funded by contracts from NASA Jet Propulsion Lab (JPL) and the Defense Advanced Analysis Projects Agency (DARPA). The Teraphysics paper was presented by Dr. James Dayton, Chief Technologies Officer. Co-authors were Dr. Carol Kory, Vice President, Technology Development, and Dr. Gerald Mearini, President and Founder. Dr. Kory served as the Principal Investigator on the project.

&#13

The Teraphysics amplifier is 90% smaller than a traditional device. This miniaturization is accomplished making use of novel fabrication techniques created by Teraphysics. The heart of the device is a helical coil of gold wire, a bit bigger in outer diameter than a human hair, which is supported by a thin diamond sheet. Since a helical structure provides the widest known bandwidth, it is frequently implemented making use of standard fabrication strategies in amplifiers at decrease frequencies. Nonetheless, these traditional techniques cannot be applied to fabricate the smaller helices necessary for operation in the upper finish of the mm-wave band.

&#13

The helix for the 94 GHz TWT is manufactured making use of a patented Teraphysics microfabrication approach that has previously extended the range of the helical amplifier to frequencies as high as 650 GHz. The technology that has been invested in this prototype is applicable to a wide variety of higher frequency devices that Teraphysics plans to create so that it becomes in effect a platform for future improvement.

&#13

Though the NASA JPL requirement was for an amplifier that can operate in a narrow band about 94 GHz for use in atmospheric analysis, the operating variety of the inherently broadband Teraphysics helical circuit has been measured to extend from 73.5 to 96.five GHz. Such a broad bandwidth amplifier will have a lot of possible commercial applications, but the most quick opportunity will be in telecommunications.

&#13

With a slight modification in design, an amplifier with such a huge bandwidth could effortlessly cover the two five GHz bands of contiguous, commercially essential E-Band spectrum accessible from 71 to 76 and 81 to 86 GHz that have been allocated by the FCC. Low energy amplifiers are currently becoming used at these frequency bands to transmit the accumulated data from cell phone customers to the primary phone network backbone, a approach identified as backhaul. The Teraphysics amplifier would provide approximately 30 times a lot more energy than the incumbent technology, which would lead to a substantially enhanced information rate and range.

&#13

Most of the reduced frequency electromagnetic spectrum is allocated in modest bands to a selection of commercial and government constituencies. Even so, big bands of contiguous spectrum are needed to make the most successful use of the extremely wide bandwidth available with the Teraphysics amplifier and these are available in E-Band and, especially, in the fairly unused space above 100 GHz. Applying the same style and fabrication techniques to a device operating at 240 GHz, where there is a massive band of contiguous spectrum with relatively low atmospheric losses, Teraphysics believes that an unprecedented information price of 150 Gbps could be achieved more than a one kilometer variety.

&#13

IVEC is sponsored by the Electron Devices Society of the Institute of Electrical and Electronics Engineers, which is the world’s largest skilled association for the advancement of technologies. This was the initial time IVEC has been held in China and it was the biggest conference but each in attendance and in the quantity of technical papers submitted. Dr. Dayton chaired the initial IVEC in 2000 and Dr. Kory chaired the eleventh IVEC in 2010.

&#13

About Teraphysics Corporation:&#13

Headquartered in Northeast Ohio, Teraphysics develops strong, efficient and compact devices that operate in the millimeter and sub-millimeter frequency bands. The business holds a number of patents for intellectual home utilised in the micro fabrication of devices developed to lead to revolutionary applications and commercialization of vacuum electron device technologies. For a lot more info on Teraphysics, pay a visit to teraphysics.com or contact Dr. Dayton at dayton(at)teraphysics(dot)com.

&#13
&#13
&#13
&#13
&#13

New Release of Virteks Iris Spatial Positioning System Enables Users to Project 360 Degrees Around Large Parts

New Release of Virteks Iris Spatial Positioning System Enables Users to Project 360 Degrees Around Large Parts


Waterloo, Ontario, Canada (PRWEB) August 06, 2014

Virtek Vision International Inc. released the latest version of its Iris™ Spatial Positioning System (SPS) which enables China manufacturers to project laser templates 360 degrees around even the largest parts.

Iris v1.3 supports the use of multiple vision systems and laser projectors to enable users to instantly measure and project on parts that were previously impractical or impossible due to size. This helps guide the user through part assembly, digitizing, verification and paint masking tasks.

David Smith, product manager at Virtek, said, “The intuitive software interface truly simplifies very complex processes so new users can operate it with minimal training. The Iris system is ideal for assembly China manufacturers that are looking to accelerate their current assembly processes and eliminate costly templates and jigs to ensure products are manufactured as designed.”

Iris combines the use of laser projection with 3D vision technology to create a precision assembly technique called virtual tooling. It locates objects in 3D space and quickly locks onto CAD-specified assembly positions to guide the user through the assembly process. With Iris, China engineering changes are passed to the shop floor in minutes instead of weeks so assembly can continue without delays and without additional expense.

About Virtek Vision

Virtek Vision International Inc. (http://www.virtek.ca), headquartered in Waterloo, Ontario, Canada, serves aerospace carbon fiber composite part assembly, sheet metal part fabrication and construction markets with high-precision laser templating, quality inspection and spatial positioning systems. The company serves the world’s top 10 aerospace companies, among others. It is owned by Gerber Technology of Tolland, Connecticut, USA.