Image from page 517 of “Railway mechanical engineer” (1916)

Image from page 517 of “Railway mechanical engineer” (1916)

A handful of good machining engineering images I discovered:

Image from page 517 of “Railway mechanical engineer” (1916)
machining engineering
Image by Web Archive Book Images
Identifier: railwaymechanica93newy
Title: Railway mechanical engineer
Year: 1916 (1910s)
Authors:
Subjects: Railroad engineering Engineering Railroads Railroad automobiles
Publisher: New York, N.Y. : Simmons-Boardman Pub. Co
Contributing Library: Carnegie Library of Pittsburgh
Digitizing Sponsor: Lyrasis Members and Sloan Foundation

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Pictures: All Pictures From Book

Click right here to view book on the web to see this illustration in context in a browseable on-line version of this book.

Text Appearing Prior to Image:
en secured to the end of the open exhaust standand extended a number of inches up into the petticoat pipe. Thepetticoat pipe itself has been lowered 18 in. so that its lowerend is now practically on a line with the center line of theboiler suitable. This was accomplished to decrease the draft in thefront end, and thereby in the firebox, in order that the airand coal may possibly enter the firebox at a velocity low sufficient topermit ihe coal to be totally consumed ahead of beingdrawn more than the arch, as a result preventing the accumulation ofslag on the flue sheet. The pulverized coal tank is divided so that pulverizedanthracite sludge might be carried in a single side and bituminouscoal in the other side. Extremely poor grades of coal can beburned in combination with soft coal by so manipulatingthe feed screws as to provide the correct proportions of softcoal and anthracite sludge necessary to maintain a propertemperature. The apparatus for conveying coal from the tender to thelocomotive consists of 4 four-in. feed screws functioning in

Text Appearing Soon after Image:
Lehigh Valley Locomotive Equipped with Pulverized Fuel Burning ApparaUib which engages the teeth in the rack on the lied. The tail-stock spindle is moved by a bandw-heel which is placed con-venient to the carriage. A huge steady rest is providedwith every machine. The bed is ribbed throughout with box sections and isfitted with a rack down a center rib which engages a pawlon the tailstock, as a result removing the thrust of a reduce from theclamps of the tail: lock direct to the bed of the lathe. Thetotal weight of the machine is 150.000 lb. pairs and driven by a variable speed inclosed marine typetwo-cylinder double acting reciprocating engine. The fanfor blowing the coal into the locomotive firebox is driven bya steam turbine. The turbine fan supplies approximately15 to 20 per cent of the air required for combustion, the restbeing drawn in by the action of the exhaust by means of theopenings in the firebox and in the burner correct. The four feeders operating in pairs avoid the fuel fromarchin

Note About Images
Please note that these images are extracted from scanned page pictures that might have been digitally enhanced for readability – coloration and appearance of these illustrations may possibly not completely resemble the original operate.

Image from web page 102 of “Les raisons des forces mouuantes auec diuerses machines tant vtilles que plaisantes aus quelles sont adioints plusieurs desseings de grotes et fontaines” (1615)
machining engineering
Image by World wide web Archive Book Photos
Identifier: gri_c00033125008477123
Title: Les raisons des forces mouuantes auec diuerses machines tant vtilles que plaisantes aus quelles sont adioints plusieurs desseings de grotes et fontaines
Year: 1615 (1610s)
Authors: Caus, Salomon de, d. 1626
Subjects: Mechanical engineering Hydraulic barrel organ Fountains Grottoes (Garden structures)
Publisher: A Francfort, En la boutique de Jan Norton
Contributing Library: Getty Investigation Institute
Digitizing Sponsor: Getty Research Institute

View Book Web page: Book Viewer
About This Book: Catalog Entry
View All Images: All Photos From Book

Click here to view book online to see this illustration in context in a browseable online version of this book.

Text Appearing Just before Image:
A LATKES1LLVST%E ET VERTVEVSE PR[NCI S SE

Text Appearing Right after Image:

Note About Photos
Please note that these images are extracted from scanned page images that may possibly have been digitally enhanced for readability – coloration and appearance of these illustrations might not perfectly resemble the original work.

Image from web page 324 of “Railway and locomotive engineering : a sensible journal of railway motive power and rolling stock” (1901)
machining engineering
Image by World wide web Archive Book Images
Identifier: railwaylocomotiv19newy
Title: Railway and locomotive engineering : a practical journal of railway motive power and rolling stock
Year: 1901 (1900s)
Authors:
Subjects: Railroads Locomotives
Publisher: New York : A. Sinclair Co
Contributing Library: Carnegie Library of Pittsburgh
Digitizing Sponsor: Lyrasis Members and Sloan Foundation

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Pictures: All Photos From Book

Click here to view book on the internet to see this illustration in context in a browseable on-line version of this book.

Text Appearing Prior to Image:
aggregate railway mileage in the Pro-vince is 1,174 miles. There were 48 newiron bridges constructed in 1905 and iiS othersare beneath construction. The totalamount expended on roadways andbridges was over ,000. July, igo6. RAILWAY AND LOCOMOTIVE ENGINEERING 313 Historic Locomotive.By the courtesy of the PennsylvaniaLines, and specifically as a outcome of theinterest shown by Mr. D. F. Crawford,common superintendent of motive power,Purdue University, at Lafayette, Ind.,has been able to add a machine of morethan passing interest to its collectionof historic locomotives. This most recent ac-quisition, which is the sixth loconintivc versity. This engine, when place to perform,and with plain wheels, performed a serv-ice which had previously involved theuse of gears. It was in reality a most ex-cellent adaptation of the means to anend, the significance of which becomesgieater when it is remembered that itwas place in service in i868. A matter which lends interest to thegiving of this loconiotivc to Purdue Uni-

Text Appearing Soon after Image:
FIG. I. TANK LOCOMOTIVt REUBEN WELLS, FORMEKLV l)N J., M. 6t I. R. R. to take its place in the Purdue museum,is the Reuben Wells, which was builtin 1868 by what was then the Jefferson-ville, Madison &amp Indianapolis Railway,for use on the Madison incline. Its ap-pearance when new is shown in Fig. i.It was remodeled somewhat not too long ago, therear end of the frame possessing been cutoflf, the number of axles decreased fromfive to four, and a saddle tank placedover the boiler. The engine as it nowappears is shown in Fig. two. This engine has been employed in the im-mediate vicinity of the city of Madison,Ind. Located upon the Ohio river andsurrounded on the east, west and northby hills increasing to a height of more than 400 ft.,Madison was easily accessible from thewater, but the steep hills on all of theroads leading away from the town madeit challenging to distribute merchandise tothe interior. After a extended period of dis-cussion the construction of a railroadwas lastly undertaken. The initial por-tion of th

Note About Images
Please note that these images are extracted from scanned page photos that might have been digitally enhanced for readability – coloration and look of these illustrations may not completely resemble the original operate.

Image from web page one hundred of “An American engineer in China” (1900)

A few nice sheet metal china pictures I identified:

Image from web page one hundred of “An American engineer in China” (1900)

Image by Net Archive Book Photos
Identifier: cu31924023226081
Title: An American engineer in China
Year: 1900 (1900s)
Authors: Parsons, William Barclay, 1859-1932
Subjects: Parsons, William Barclay, 1859-1932 Railroads
Publisher: New York, McClure, Phillips &amp co.
Contributing Library: Cornell University Library
Digitizing Sponsor: MSN

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Photos: All Pictures From Book

Click right here to view book on the internet to see this illustration in context in a browseable on-line version of this book.

Text Appearing Before Image:
set, I donot know, but the last we saw of that man he washugging his rind like a ti-easure. Just before we hadseen the last of his horse, however, we felt that ifthe pumaloe rind had constituted the complete ofthe purchase-price tag we still should have been thelosers. It is surprising how closely the men and women in onesection of the country pattern after these else-where, when one remembers the lack, almostabsolute lack, of intercommunication. But inspite of the basic sameness, which perhapsappears greater than it is on account of the uni-formity in physiognomy of the individuals, with theMongolian coloring and jet-black hair, there weremany pecuHar customs which appeared to belocalized, as a lot of of them were located only in Chapter III: Hu-nan, the Closed Province 95 little districts, and travelled Chinese who accom-panied me, stated that they had in no way prior to seensimilar factors elsewhere in the empire. Of thesethe most singular was the carrying of small bam-boo baskets lined with sheet metal and filled with

Text Appearing Soon after Image:
A Peculiar Custom by Chinese Women of Wearing Heat-ing-Baskets hot wood-ashes. Such baskets the ladies in onelocality suspend from a belt beneath their shortblouses. Often the baskets are worn infront, occasionally behind, and occasionally in bothplaces, according, apparently, to the fancy of thewearer. Kids also created use of the heating 96 An American Engineer in China apparatus, but guys only rarely. No matter howworn, the impact in all circumstances was each extraordi-nary and comical. To get a photograph of Chi-nese females is almost as hard as to photographa herd of wild deer. Ladies are supposed tokeep away from any man, and of course a foreignman is specially terrible. The picture of thewomen and their baskets was obtained by cau-tious stalking behind some Chinese, although theirattention was attracted by a single of the members ofmy staff. The instant soon after the shutter droppedthe group had scattered. In farming techniques the Chinaman in the inte-rior is, of course, centuries behind. His gra

Note About Photos
Please note that these pictures are extracted from scanned web page images that could have been digitally enhanced for readability – coloration and appearance of these illustrations might not completely resemble the original operate.

Image from page 142 of “The art of lead burning a sensible treatise explaining the apparatus and processes” (1905)

Image by Web Archive Book Photos
Identifier: artofleadburning00fayc
Title: The art of lead burning a practical treatise explaining the apparatus and processes
Year: 1905 (1900s)
Authors: Fay, C. H
Subjects: Lead burning
Publisher: New York, D. Williams company
Contributing Library: The Library of Congress
Digitizing Sponsor: The Library of Congress

View Book Web page: Book Viewer
About This Book: Catalog Entry
View All Photos: All Photos From Book

Click right here to view book online to see this illustration in context in a browseable on the internet version of this book.

Text Appearing Just before Image:
d just as forlead. Britannia metal is quick becoming the favoritelining for splash and drip boards on butlers pan-attempt sinks, as also for lining the operate benches insaloons. It is soft sufficient to permit the most deli-cate china to be laid on it without danger of chip-ping, and is also quite easy to maintain clean. It takesa higher polish and usually appears properly. The methodof cutting the metal for a butlers pantry sink isshown in Fig. 51, the dotted lines displaying theactual dimensions of the post to be covered,although the complete lines show the laps essential tocover the edges of the board. This metal isharder than lead, and will not dress smooth withthe dresser. Any uneven spots should be presseddown with a hot flatiron. The strategy of turn-ing the edges is shown at a. The bending iron isheated and rubbed over the edge, progressively turn- THE ART OF LEAD BURNING. 139 ing the edges till they are at their suitable posi-tion. The iron have to be continually heated to in-certain the very best final results, and if appropriately completed no

Text Appearing After Image:
cq CQ 1 140 THE ART OF LEAD BURNING. wrinkles will appear. A lined function bench isalso shown in Fig, 52, which shows the methodof putting in the bar washer. The sheet metalmust be reduce and fitted to its spot and all theseams feasible must be soldered ahead of placingthe metal in position. The edges ought to be tackedon the under side of the function, when practicable,with copper tacks. Sooner or later the blow pipe solderer will becalled upon to make repairs on Britannia metal,and will be surprised to locate that it will be impos-sible to solder the metal, owing to the excess ofmoisture beneath it. The best way to overcomethis, which is virtually the only trouble thatoccurs, is to cut out a tiny square patch. Theedge can be cleaned and a patch of new metalcarefully fitted into the hole. When ready to be-gin soldering, a piece of blotting paper must beinserted amongst the patch and board. Thispaper will absorb all the moisture and allow theseam to be neatly soldered. The man who makeshimself

Note About Photos
Please note that these images are extracted from scanned page photos that may have been digitally enhanced for readability – coloration and look of these illustrations may not completely resemble the original work.

Image from web page 620 of “Mechanical Contracting & Plumbing January-December 1912” (1912)

Image by Web Archive Book Images
Identifier: mechcontract1912toro
Title: Mechanical Contracting &amp Plumbing January-December 1912
Year: 1912 (1910s)
Authors:
Subjects: Air conditioning Refrigeration and refrigerating machinery Heating Plumbing
Publisher: Toronto : Maclean-Hunter Pub. Co.
Contributing Library: Fisher – University of Toronto
Digitizing Sponsor: University of Toronto

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Pictures: All Pictures From Book

Click right here to view book on-line to see this illustration in context in a browseable online version of this book.

Text Appearing Prior to Image:
-■•mum We Can FurnishYour Requirements in All PLUMBING GOODS We deal with a full line of Enameled Baths Enameled LavatoriesSinks and Laundry Tubs

Text Appearing After Image:
Create us about ourVictorian China Lavatories. The James Morrison Brass Mfg.Firm, Ltd. Manufacturers and dealers in a completeline of Plumbing and Heating Supplies 93-97 Adelaide Street West TORONTO 19 Comprehensive Course in Sheet Metal Operate In prob. 23, plate 21, fig. 1 representsa pail, of which A-B is a boss, or rein-forcement on the manage. The pattern is simply a circle havingthe exact same curve as the handle, and iscut out to shape shown by fig. 2, thenformed to shape by fig. 3, and solderedto deal with. In prob. 24, fig. 1, is a strainer pail,the brest B is created the identical as thebrest on the watering pail, prob. 18,plate 20. To develop the spout A, continue theline C- any distance, and parallel to By L. W. KOSER this carry a line from the point V, asV-7. Draw a cross section of the spout fig.2, then divide it into equal spaces andcarry lines from exact same till they reduce thelines O-V and C-V. Lay out a stretchout at proper anglesto C-O, as fig. three, and carry lines fromthe different points o

Note About Images
Please note that these images are extracted from scanned web page images that could have been digitally enhanced for readability – coloration and appearance of these illustrations may possibly not completely resemble the original work.

In Mojave Desert, Engineer Eyes the Sky as Profession Requires Flight

In Mojave Desert, Engineer Eyes the Sky as Career Requires Flight
There are certain inventive milestones in human history that define a society: The ancient Egyptians had the Excellent Pyramid of Giza the Ming Dynasty had the Great Wall of China the Roman Empire had the Colosseum and Western Europe had the …
Study far more on University of Texas at Dallas (press release)

five lessons I discovered developing a hardware startup
For hardware, developments in 3D printing and prototyping boards such as the Arduino or Raspberry Pi implies that prototyping modest plastic components and electronics is significantly more rapidly and more affordable than prior to. Even so, unless your product can be wholly printed …
Study far more on Tech in Asia

Tech disruption hangs over automakers at Frankfurt show
Consultancy McKinsey discovered expectations of rapid alter were widespread in the industry. In a survey of 91 sector executives for a report released Wednesday, … The organization surveyed more than 1,000 current automobile customers every in Germany, the U.S. and China …
Read far more on U.S. News & World Report

DeWys Manufacturing Hires Curtis Kolarik as New Manufacturing Engineer

Marne, MI (PRWEB) September 11, 2014

DeWys Manufacturing Inc. a West-Michigan primarily based metal options company, is pleased to announce the addition of Curtis Kolarik as our new Manufacturing Engineer. In his new part, Curtis will be working to enhance operations and efficiencies within the business. His first project is to implement a big weldment location. This will increase throughput of bulky weldments by utilizing a three axis welding positioner to lower welding time.

&#13

Prior to joining DeWys Manufacturing, Curtis attended Northwestern Michigan College, where he got his Associates of Applied Science. He then transferred to Grand Valley State University for a Bachelor’s degree in Engineering with a main in Solution Design and Manufacturing. Even though attending college he was an intern at DeWys Mfg. for his last three semesters, and employed DeWys for his senior project. Alongside a couple of classmates, they created a two axis positioner which will permit one set up to complete a component as an alternative of several set ups. This will cut down the time per element by 40 seconds with an estimated 35% price savings. The understanding Curtis gained from NMC and GVSU will make him a fantastic asset to DeWys Manufacturing.

&#13

About DeWys

&#13

DeWys (pronounced De-Wise) Manufacturing supplies precision metal fabrication to a variety of clientele from workplace furniture to commercial components. From its manufacturing facility in West Michigan, the organization supplies a wide range of metal production and assembly capabilities to far more than 160 clients in Michigan, Indiana, Wisconsin, Ohio, and numerous other areas of the United States.

&#13

For added data, pay a visit to dewysmfg.com or make contact with DeWys Mfg. at (616) 677-5281

&#13
&#13
&#13
&#13
&#13

Associated Precision Component Manufacturers Press Releases

Image from web page 444 of “Architect and engineer” (1905)

Image from web page 444 of “Architect and engineer” (1905)

A few good precision engineered products pictures I identified:

Image from web page 444 of “Architect and engineer” (1905)

Image by Internet Archive Book Pictures
Identifier: architectenginee12135sanf
Title: Architect and engineer
Year: 1905 (1900s)
Authors:
Subjects: Architecture Architecture Architecture Constructing
Publisher: San Francisco : Architect and Engineer, Inc

View Book Web page: Book Viewer
About This Book: Catalog Entry
View All Photos: All Pictures From Book

Click here to view book on the internet to see this illustration in context in a browseable on the web version of this book.

Text Appearing Just before Image:
Create for Specifics and Architects Specifications WHITE PINE SASH CO. – – SPOKANE. WASH. Manujaclurcrs oj Precision Sash anil Frames jor 25 Years.

Text Appearing After Image:
The Architect and Engineer, September, 1935 Creating MATERIAL Homes ANTICIPATING A Industry FOR THEIR Goods IN CONNECTION WITH THE 1938 BRIDGE EXPOSITION, WILL Uncover THE ARCHITECT AND ENGINEER THE Ideal Feasible Marketing MEDIUM * * * PLANS AND SPECIFICATIONS FOR THE FAIR BUILDINGS WILL Quickly BE Under WAY. * * * NOW IS THE TIME TO PUBLICIZEYOUR Goods. by the installation of Leahy burners and gas fuelregulators. The results, according to Chief Engineer S.Hasselberg, have been lowered fuel cost, consid-erable saving in operating maintenance, and in-creased cleanliness all through. An efficiency offrom 81, to 83 t is secured from this steam plant,which heats 96,000 sq. ft. of floor space. LAND Arranging The Pacific Northwest Regional Planning Com-mission, at a current meeting, created two urgent rec-ommendations concerning land preparing of generalinterest. The very first of these issues the prosecution ofland classification surveys: Due to the fact of the fundamental and important significance ofland classifica

Note About Photos
Please note that these images are extracted from scanned web page images that might have been digitally enhanced for readability – coloration and look of these illustrations could not completely resemble the original perform.

Coaching Support Center

Image by U.S. Army Corps of Engineers Savannah District
FORT BRAGG, N.C. — The U.S. Army Corps of Engineers Savannah District completed this million Education Help Center in April 2011, which serves as a central location for all Army coaching aids, items and devices on Fort Bragg. Furthermore, the 118,700 square-foot facility involves 12 training rooms where Soldiers use advanced video gaming technology for virtual weapons instruction. The sophisticated technologies mimics genuine globe battlefield scenarios and offers Soldiers with useful feedback for improving their accuracy and precision in weapons firing. With construction performed by North Carolina-primarily based prime contractor Osborne Business, this project is the initial warehouse facility of its type in the Army. It will serve as a prototype for equivalent facilities at other main Army installations worldwide.

Pictured left to proper: USACE team members Karl Vanstavoren and Ken Schroeder.
USACE photo by Tracy Robillard.

Former mechanical engineer finds a niche in manufacturing electric lanterns

Former mechanical engineer finds a niche in manufacturing electric lanterns
“The very first one and half years had been solely focused on study and improvement, absolutely nothing else,” admits Royce, who wanted to place a correct manufacturing procedure in location first before something else. The period was … The parts for the lanterns had to be …
Read a lot more on The Star On-line

AirVenture Report: 2014
Strausberg, Germany-based Stemme showcased its S10VT higher-overall performance motor glider at AirVenture 2014, on the heels of forging a manufacturing and advertising agreement with LSA OEM Remos Aircraft of Pasewalk, Germany. …. of the Flying Challenger Cup …
Read a lot more on Aviation International News

United Patients Group Announces the Herbalizer Vaporizer Technology Developed by Former NASA Engineer Hits the Cannabis Market Running

United Patients Group Announces the Herbalizer Vaporizer Technology Developed by Former NASA Engineer Hits the Cannabis Market Running


San Francisco, CA (PRWEB) August 01, 2014

As medical cannabis grows in popularity, more and more patients have been turning to vaporizers as a superior method of ingesting their medicine. The selective review committee at United Patients Group, a trusted online resource for medicinal cannabis information, have been looking for the perfect vaporizing system to recommend to patients, and they’ve finally found it: the Herbalizer.

The sleek clamshell design, adjustable heat settings, aromatherapy mode, and discreet stash spot make “Herbie” the perfect companion for cannabis patients of all experience levels—earning it the United Patients Group Seal of Approval.

“We are proud to give our Seal of Approval to the Herbalizer,” declares John Malanca, founder and owner of United Patients Group. “Herbie is the most advanced vaporizing system on the market, but it’s so easy to use that even novice cannabis patients will love it.”

Many medical cannabis patients find vaporizing to be the easiest delivery system for cannabis relief. Smoking your medicine can be hard on the lungs and destroys many of the gentle components of cannabis, eating it can take too long to take effect and too uncontrolled. Vaporizing delivers quick relief without the smoke—a win/win. And, vaporization saves you money on your medicine because there is no waste.

The Herbalizer is designed with smartvape technology to deliver precise temperature vaporization. This precision makes Herbie the best vaporizer for patients because it enables specific cannabinoid extraction, and has control and repeatability of the relief it delivers. It functions in two modes, vapor-therapy and aroma-therapy, so patients can choose between three delivery modes: a balloon, a silicone whip, or freestyle.

“We recommend the Herbalizer to our network of patients because of its controlled delivery system, product design, and user experience, all of which are unparalleled,” says Malanca. “Herbie gives patients the right dosage of medicine and then gives them a relaxing and rejuvenating ambiance with its aroma-therapy feature. This one’s a game-changer!”

For more information about the Herbalizer, visit http://www.herbalizer.com.

For more information about medical cannabis or the United Patients Group Seal of Approval, visit http://www.UnitedPatientsGroup.com.

About UnitedPatientsGroup.com:

UnitedPatientsGroup.com is a discreet, safe, and professional online medical cannabis information resource for prospective and current patients, caregivers, and medicinal cannabis industry professionals.

While most online medical marijuana sites cater to patients already familiar with medical marijuana, the UnitedPatientsGroup.com website is a comprehensive and easy-to-use information source for people of all ages and experience levels, from novice medical cannabis users to experienced industry professionals. The site’s News, Resource, and Blog pages introduce new patients to the ins and outs of medical marijuana healthcare, while helping experienced providers stay abreast of the latest developments in THC and CBD therapies.

A complimentary Five Star-rated United Patients Group medical marijuana app is available on the iTunes app store for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation) and any iPad.